Baby car-seat blanket with tutorial

DSC_0356

We are expecting our next baby and he is going to be born (hopefuly not before) January. My three-year-old son was born in September which means we still have lots of warm winter-clothes for the little one but slightly in a different size, meaning bigger. So I am collecting warm babyclothing in newborn-size now. Also, our daily life-style is different now: I have to get into the car and pick up my older son from the kindergarten every single day at the same time. This got me thinking: how am I going to manage this with a newborn? It is something that many parent can manage, so I will, too. But to make it just a little bit easier, I figured out to create a couple things, like this car-seat baby blanket. It will be useful because the temperature in the house, in the car and in the kindergarten will never be really cold but on the street it might be. Yes, we used regular blankets with my first son but we also lost a couple of them. And we mostly used the stroller anyway, not the car seat…

To make this blanket, I needed a warm but not too thick fabric, so I choose the combination of fleece and cotton. I bought a 130x170cm big fleece blanket. I could have bought it as fabric, but I just didn’t have time to head to the fabric store. This way was easier for me and it only costed 3€. The other two fabric were already on hand at home.

Then I was searching online for DIY ideas but I couldn’t find anything that I liked. Or if I found something interesting, then it had no tutorial. So I came up with my own idea, made it, it turned out exactly how I wanted and now I am sharing the tutorial with you.

What you will need for one blanket:

– fleece ca. 130x150cm

– a cotton fabric of your choice for the inner side ca. 130x120cm

– an other cotton fabric for the bag-part ca. 50x50cm

I drew a “sample” or “plan” for myself and it looked something like this:

DSC_0330

I decided to make the rounded top but if you want to make a hoody, then make the square-kind top and at the end attache three pair of magnetic buttons.

First I took out the cover from our baby seat (maxi cosi) and layed on top of my fleece. I traced the edges and the holes with a pencil to get some idea how big this thing should be.

DSC_0327

In the car seat there are two sets of holes for the seat belt. Mark them both and the one down in the middle, as well!

DSC_0328Then comes the tricky part: I  just drew the whole shape following my “plan”. I folded it in half, so both sides will be the same, and then cut it out.

DSC_0326

Note: I could have made the bottom a bit wilder… next time.

Then I layed the leftover fabric underneath and cut around the bottom. Don’t have to cut farther then 5 cm from the corners. (Shown on the next picture)

DSC_0329

Then I took off the blanket and folded the leftover-halfcut fabric into half. Marked wher the top should be and then cut it.

DSC_0332

Now I had the two pieces I needed.

DSC_0333As the next step, I cut out the same shape from the baige cotton fabric, and the smaller fabric with the elephant pattern. I just simply layed the fleece pieces onto the cotton fabrics and cut around them.

DSC_0335

When I was finished with the cutting, I layed the two smaller parts onto each other, facing the right sides and then sewed just the top together. Then I turned it inside out and sewed it along the edge again.

Babaules-takaro

 

After that I was making a fabric-sandwich: put the cotton fabric wrong side down, then the smaller pieces facing the pattern up, then the fleece facing your markings down.

Babaules-takaro1Pin all four layers together and sew. Don’t forget to leave a gap somewhere to turn the whole thing inside out later.

DSC_0342

Then I made an other seam around the edge from where the bag on the bottom starts to the other end of it. I forgot to take a picture of this step but hopefuly you understand what I am trying to say. The important thing is to close the gap once the blanket is turned inside out. The good news is that your blanket is basically done. The last thing to do is to make those button-holes that you marked at the beginning. But before you do that, make sure to check if your markings are at the right place. Mine were not! I put back the car-seat together and put the blanket on top, just as we would use it. Then took a look at the seatbelt and made new markings.

Babaules-takaro2

Then I rememberd, that there is somewhere a newborn addition/extension to the car seat. I was able to find it and tried the blanket out with it. I noticed that I had to make a third marking for the seatbelt-hole because it had a completely different size now. Don’t forget to do this!

Babaules-takaro3

 

Finally I sewed the button holes for the seatbelts but only after careful measuring! And voila! The blanket was done! I am so happy with the result!

DSC_0351

My model was the huge teddy-bear once again. It is much bigger then a newborn (about 70-80cm) but I think you get the idea how the blanket works and looks in use.

 

Babaules-takaro4

 

For me it was very important to have a cotton fabric inside of the blanket because my older son’s skin is sensitive to anything that is not cotton, so I had to make sure, that the little one has also cotton touching his skin, if possible. Just in case, you know.

I made some other great projects for the car that I will present in the next post. Not much baby-related but very practical things if you use your car a lot.

And at the end I still had lot of left-over fabric. My evening-project was to make a hat(again, with cotton on the inside) and a scarf for my older son. We call it the “elf-hat” and he loves it! (And as a bonus for me, I don’t have to pay an other 8-10€ for a new set of hat and scarf!)

DSC_0358What do you think of this project? I am very happy with the price. I gave only 3€ out, but with the cotton fabrics the hole blanket costs no more than 6-10€. If you buy something like this in a store or even online, you will at least have to pay 15-20€, if not more… But probably more. This sewing project took me about three hours which is not bad, I think. But my favorite  thing about this project, that I made it especialy  for our son, and that is priceless.

 

UPDATE: The blanket has been in use for six weeks now and it is really great. Here is a picture with our son (and no more teddy bear):
DSC_1445

 

 

 

 

Advertisements

2 thoughts on “Baby car-seat blanket with tutorial

  1. Pingback: DIY Elf Hat | Rita's Design

  2. Pingback: Infinity Scarf and Hat | Rita's Design

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s