TUTORIAL: Scout Binder Cover

Not many people know about me that as a teenager I was scouting in Hungary, in a great group named after St. Joseph Calasant. It was an amazing period of my life and I miss it a lot. This year my group celebrates the 25th anniversary which is something to be proud of! Unfortunately I was informed a bit too late about the ball that the group organized to celebrate this occasion and I didn’t get an airplane ticket to fly back home but I decided to send them something that I created as a thank you for those memorable years. First I wanted to send something for a ruffle game but there was none. They prepared other games, so finally I decided to make a scout themed binder cover and I checked with one of the ball-organizers and she said it would be a great present for the leader of the group. All right, then let’s get started!

My inspiration was the invitation for the ball:

412meghivoCan you see the knot on the bottom? It does appear on my binder cover as well. Here are the steps:

1. MEASURE THE BINDER YOU HAVE! Mine was: 31x27x6cm

IMGP9286

Cut out the fabrics accordingly: add 1cm on each side to the size of your binder. I needed these:

– 2x  33x62cm (one orange, one beige)

-2x   20x33cm (both orange)

-1x   20x62cm (green)

-2x  8x15cm (green) for the binding part

-1x  11x15cm (green) for the phone pocket

-2x  8x11cm (one beige, one green) for the phone pocket upper part

-1x  9x15cm (green) for the pen holder/pocket

-1x scout lily cut out on vliesofix (interfacing)

– 1m tvine

– a group number if you have one

– 2x   2,5cm velcro

IMGP9285

2. As the second step IRON every piece and fold back 1cm on the 20x62cm green fabric lengthwise and press-iron it.

IMGP92843. Put this green piece on the biggest orange fabric. Position it in the middle then sew it lengthwise on both sides. Not it should look like this:

IMGP92874. PREPARE THE SCOUT LILY! I searched one on the internet, printed it out and used it as my pattern. Iron interfacing onto a beige fabric. Then put the pattern and the fabric onto each other and hold them up to your window and trace the lines. Then cut out the lily, iron it onto the green fabric and sew it onto! Position it in the middle of the front side.

IMGP9283

IMGP9290First I sewed the lines/seams in the middle of the lily, then on the edges.

Also with interfacing iron and sew the group-number in the middle of the whole orange/green fabrics. It helps if you press-iron where the edges of the binder will be, see picture bellow:

IMGP9288

5. Make the knot and sew the twine onto the big orange fabric parallel with the edge of the green fabric.

6. SEW HEMS on both 20x33cm orange fabric on one side lengthwise:

IMGP92937. As the next step you have to make the PHONE POCKET! Sew a hem on the 11x15cm green fabric on the shorter side. Then take the 8x11cm fabrics (beige and green) and sew them tegether on three sides facing the right sides together and leaving a longer side open. Then turn it out, iron the edge and sew one side of the velcro onto it. Sew the other side of the velcro onto the the green fabric with the hem. Now it should look like the two pieces in the middle of  the picture below:

IMGP92928. HEM the shorter side of the 9x15cm green fabric. This will be the PEN POCKET!

9. Facing the right sides, sew together the two 8x15cm green fabrics on three sides leaving one short side open, turn it inside out and iron the edges. Sew one side of the other velcro onto it. See on the left side on the picture above!

10. Fold 1cm from the edges of the phone pocket and pen holder back and sew them onto the 20x33cm orange pieces. You should fold inside 1cm from the open end of the upper part of the phone pocket and then sew a seam through it. Now it is easier to sew it onto the orange fabric. Pay attention: position the upper side of the phone pocket so the velcro meets with it other side!

Varras+Blog46

Now all the parts are ready to go and the should look like this:

IMGP9302

11.  Here comes the trickiest but the best part: ASSEMBLING EVERYTHING together.

Varras+Blog45

a.) Put the big orange fabric (with the green fabric and the lily) down first. It should be facing up!

b.) Now put the green binder with the velcro on the right side (in the middle) facing the velcro upside!

c.) Now put the two orange pieces on the sides facing down! In my case the one with the phone pocket came to the right side, and the one with the pen holder came to the left side. The hem of the orange fabric should be facing the middle, that’s the most important thing!

d.) Finally put the big green fabric to cover all the others! Pin it all around! Sew along the sides, 1cm from the edges BUT leave about 10cm opened because that’s where you will turn the whole thing inside out!

12. Sew and then turn the whole thing inside out!

IMGP9307How about that?

IMGP930813. The final step is to iron it and hand stitch that 10 cm gap. Hopefully it fits perfectly to the binder and it is good to go!

IMGP9323

IMGP9326

 

The greatest thing about this technique that by learning it you will be able to make any kind of notebook or book cover! There is no limit to the possibilities! I hope you enjoyed this tutorial and if you make something using this, please send me a picture and share your thoughts on it!

Advertisements

One thought on “TUTORIAL: Scout Binder Cover

  1. Pingback: Binder in Frog Cover | Rita's Design

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s